Accessories

How do I connect an LED Strip?

An LED Strip works on 12V or 24V. This means that it can't be connected directly to 230 Volts. A power supply is required which supplies the LED strip with the correct voltage. When you choose a power supply, you need to pay attention to the wattage.

...Read more

How do I connect an LED Strip?

An LED Strip works on 12V or 24V. This means that it can't be connected directly to 230 Volts. A power supply is required which supplies the LED strip with the correct voltage. When you choose a power supply, you need to pay attention to the wattage.

...Read more
207 ProductsPage 1 of 9
DC Female 5.5mm plug
This plug can be soldered onto a LED strip to connect it to one of our power supplies....
Dow Corning 732 Transparent RTV Silicone Sealant
After you cut a waterproof LED Strip, the ends are no longer waterproof. Use this silcione glue in combination with end caps (included with the waterp...
Waterproof 3-core Cable Connector
Convenient waterproof connector for 3-core cables, compatible with 12V, 24V, 48V, and 230V. Easy to use: Insert the cables and crimp the connector wit...
TC-421 24-hour timed LED Controller
Timed LED Controller with PC Software which can be used to create a 24-hour light-cycle for 5 separate PWM-dimmable channels. Excellent controller for...
Soldering service for flexible LED Strips
No idea how to solder? No problem!...
VTSS4N 40-48 Watt Soldering Station
The Velleman VTSS4N is suitable for most soldering work. This soldering station has an adjustable temperature of 150 to 420 °C. A temperature of +/- ...
Cable (RGBW 5 veins) per meter
This cable is suitable for connecting RGBW LED Strips to each other and to connect them to your RGBW Controller. This RGBW wire has 5 veins: Red, gree...
Power cord Euro Grounded Black
Power cord Euro Grounded Black. Fits on all desktop power supplies on our website, including the Meanwell GST-series....
Snappy TRIAC dimmable Power supply 30 Watt SP30
TRIAC Dimmable constant voltage power supply for LED strips Snappy SP30. This Power supply can be dimmed using any traditional 230V Wall dimmer. Dimmi...
Cable (2 veins) per meter
This cable is suitable for connecting LED Strips to each other and to connect them to your Controller. This cable has 2 veins. Also suitable for use w...
2-pin Connector Set (1x Male & 1x Female)
2-pin connector set (male & female) with wire leads. Perfect for connecting LED strips, power supplies, and accessories. Durable wires ensure reliable...
Gledopto 5 in 1 LED Strip Controller GL-C-201P 20A
Perfect and affordable alternative to, for example, Philips Hue or Ikea TRÅDFRI. This Zigbee controller is high power (max. 20A) and suitable for all...
Gledopto 5-in-1 LED Strip ControllerZigbee 3.0
GLEDOPTO GL-C-001P ZIGBEE 3.0 - 5-in-1 LED Strip Controller DC 12 - 24V Compatible with Amazon Echo plus / Osram Lightify / Philips Hue / etc. Also co...
Spare soldering iron for VTSSC50N soldering station
Original spare soldering iron for the Velleman VTSSC50N soldering station. With intensive use, the soldering iron of the VTSSC50N can become defective...
Miboxer CCT LED 4 zone remote FUT007
Remote control for Miboxer, suitable for single-color or dual white LED strips, can control up to 4 (groups of) controllers in 4 separate zones. The r...
Snappy TRIAC dimmable Power supply 50 Watt SP50-24VFT
TRIAC Dimmable constant voltage power supply for LED strips Snappy 50 Watt SP50-24VFT. This Power supply can be dimmed using any traditional 230V Wall...
DMX to SPI Decoder
Using this decoder, you can use a DMX512 signal to control the individual pixels on a digital LED Strip. Ideal for use in combination with our digital...
VTSSC50N 48 Watt Soldering Station
The Velleman VTSSC50N is perfect for both beginners and professionals. This soldering station has an adjustable temperature of 150 to 420 °C. A tempe...
Miboxer FUT039 RGBCCT LED Controller for 4 Zone Remote
-67%
Milight 5-channel RGB+CCT Controller. Model: FUT039. Max. current 10A (240W at 24V). Max. 6A per channel. Compatible with all Milight multi-zone remot...
End Cap for waterproof flexible LED Strip
When a flexible waterproof LED Strip is cut, the cut-section is no longer waterproof. Use these end caps and silicon-glue (sold separately, see relate...
Miboxer FUT038 RGBW LED Controller for 4 Zone Remote
-67%
Milight RGBW Controller. Model: FUT 038. Max. current 10A (240W at 24V). Max. 6A per channel. Suitable for all Milight multi-zone remotes....
Miboxer LED Dimmer with 4-zone Remote Control
-36%
This is a very versatile LED Dimmer for professional or home use. With just one remote you have total control over your LED Strip lighting. You can di...
Miboxer WiFi Module for 4-Zone Controller (iOS / Android)
-50%
Using this WiFi module, you can control one or multiple 4-zone controllers from your smartphone or tablet (iOS and android compatible). This WiFi modu...
LED Dimmer
-33%
LED Dimmer
€14,95€9,99
Compact dimmer for your LED Strips. Color: White. The knob is a combined on/off-switch and dimmer. Please pay attention to the max. load, do not conne...
Follow the following steps: - Determine the power consumption of the LED strip. The power consumption of each LED strip is shown in Watts per meter, in the specifications section on its product page. - Multiply the power consumption per meter with the number of meters. Example: A LED strip uses 9.6 Watts per meter, and the desired length is 4 meters. The total power consumption is 4x 9.6 Watts = 38,4 Watts. - Find a power supply with a power of 38,4 Watts or more. In this example, a 60 Watt power supply could be used. There is no maximum wattage: any power supply with a power of 38,4 Watts or more will do. The LED strip will never pull more than 38,4 Watts from the power supply.

How can you control the color or brightness of an LED Strip?

A controller or dimmer can be placed between the power supply and the LED Strip. The brightness of a single color LED strip, such as warm white, can be controlled with an LED Strip dimmer. RGB or RGBW LED strips can be controlled using an RGB or RGBW Controller. An RGB Controller can also control the brightness of the RGB LED Strip.
In this product category you will find everything you need for your LED strips. All LED Strips on our website work on 12 Volts / 24 Volts, so you need to use a power supply to connect them to 110-230V. You can also add a dimmer for single color LED strips and an RGB Controller for RGB LED Strips. We also sell various cables, connectors, aluminium profiles, and many other accessories.