|Availability:||Out of stock|
|Delivery time:||3-6 Weeks|
Fibaro Z-Wave RGBW Controller for RGBW LED strips
Z-wave is an excellent choice for anyone who wants to build a wireless home automation system. Products which utilize this protocol are relatively cheap, there are many devices on the market, the software support is good and the protocol is safe and robust.
This RGBW Z-Wave module can be connected to, amongst others, a Fibaro Home Center (Please see related products at the bottom of the page).
On the output of this RGBW Module you can connect an RGBW LED Strip with a maximum power of up to 4x 3A, which is a total of 144 Watts at 12 Volts or 288 Watts at 24 Volts.
The controller also features 4 inputs which can be used to connect any sensor with a 1-10V output.
How to install:
Connect the controller between the power supply and the (RGBW) LED strip
Please note: You can not connect an infinite amount of LED Strip to the controller. The power rating of the controller is 144W (at 12V) / 288W (at 24V). If you want to connect more than 144 / 288 Watts of LED strip to the controller, you need to use amplifiers.
Please see manual (English) for more information.
●Brand and type: Fibaro RGBW LED Strip Module
●Voltage: 12-24 Volt DC
●Number of outputs: 4 channels PWM Dimmed
●Number of inputs: 4 channels (1-10V)
●Max. current: 12A (3A per channel)
●Max. power: 144W (@12V), 288W (@24V)