LED Strip RGB-WW 60 LED/m Single-Chip Flexible Waterproof (IP68) per 50cm

Waterproof RGB-WW Flexible LED Strip sold per 50cm. The LED Strip is delivered in one piece up to 5 meters. Example: If you put 3x 50cm of LED strip in your shopping cart, you will receive one 1.5 meter LED Strip. However, if you put 16x 50cm of LED Strip in your shopping cart, it is delivered as 1x5m and 1x3m. Etc.
You can solder multiple lengths together to create one long LED Strip.

This single chip RGB-WW LED Strip can produce any color that you want, including warm white! Using normal RGB LED Strip it is quite hard to set a pleasant warm white color, so this LED Strip is ideal if you want to have the option to choose between both RGB Colors and Warm White.
Both the RGB and warm white color are contained in a single LED chip, which guarantees that the resulting light output is smooth and uniform.

Applications: Stylish architectural lighting. Illumination of your stairs, kitchen, living room, restaurant, etc. A versatile product which allows you to create stunning lighting effects in a heartbeat!

This LED strip contains 30 RGB LEDs and 30 Warm White LEDs Per Meter.
This LED Strip is fully waterproof (IP68), and can be used both indoors and outdoors.

This LED Strip requires the use of an RGB-WW Controller. It works on 12 Volts, so to connect it to a 110-230V power outlet you will also need a power supply. Please see the category Accessories - Power Supplies for this. The more LED strip you want to connect, the higher the power consumption will be and therefore the bigger the power supply must be. Look below for an indication of which power supply to use with this LED strip:

10cm - 80cm: Power Supply 12 Watt
80cm - 2.5 meters: Power Supply 36 Watt
2.5 meters - 4 meters: Power Supply 60 Watt
4 meters - 5.5 meters: Power Supply 84 Watt
5.5 meters - 8 meters: Power Supply 120 Watt
8 meters - 16 meters: Power supply 200 Watt
16 meters - 27 meters: Power Supply 400 Watt
More than 27 meters: Use multiple power supplies in combination with an amplifier or contact us for advice and price. 
Note: Connecting one single length of more than 14 meters is not possible, due to loss of current inside the LED strip. For lengths longer than 14 meters, the strip should be split up and powered separately. Also please pay attention to the maximum current of your RGB-WW Controller. Usually this is around 144 Watts. To connect more than 144 Watts of LED Strip to it, you will need to use RGB Amplifiers. Please do not hesitate to contact us for advice!

Using a waterproof power supply:
10cm - 2 meters: Power Supply 30 Watt Waterproof
2 meters - 4 meters: Power Supply 60 Watt Waterproof
4 meters - 7 meters: Power Supply 100 Watt Waterproof
7 meters or more: Use multiple power supplies or contact us for advice and price.

Remark: This LED strip is delivered on waterproof rolls of 5 meters with connection wire on each end. If you want to shorten the LED strip, or if you order a shorter length, you will need to solder new wires onto the LED strip and make the cut section waterproof again. For this purpose, the LED strip comes with end-caps. You can use glue, two component resin or putty to secure these end caps to the strip and make everything waterproof again. You can also order silicone glue from our website.
 
For more information on how to connect LED Strips, please see our manual.

This product is in stock in large quantities. If you are searching for LED strips with specific requirements, please contact [email protected] for info and prices. We can supply custom LED Strips of almost any type.

Details:
Luminous flux: Max. 1000 lumen per meter.
LED Color: RGB / Warm White 2800-3200K.
No. of LEDs per meter: 60 RGBWW Single Chip
LED Type: 5050 SMD
Waterproof: Yes (IP68)
Voltage: 12V
Amperage: 1.2 A / meter
Power: 14.4 W / meter
Can be cut every 6 LEDs.
Strip width: 14mm
Strip height: 5mm