Flexible LED Strip sold per 50cm.
||Shipped within 24 hours
The LED Strip is delivered in one piece up to 5 meters. Example: If you put 3x 50cm of LED strip in your shopping cart, you will receive one 1.5 meter LED Strip. However, if you put 16x 50cm of LED Strip in your shopping cart, it is delivered as 1x5m and 1x3m. Etc.
You can solder multiple lengths together to create one long LED Strip.
We can supply this LED strip in 24 Volts
High density, single line 350 LED/m SMD 2216 flexible LED-strip with adhesive for easy mounting.
This strip is very easy to install. You can cut the strip every 2,5 cm to create any size you need. Moreover, this LED-strip is extremely flexible and very narrow corners can be made with it. The power is supplied through the soldering points which can be found on the strip every 2,5 centimeters.
Applications: Stylish architectural lighting. Illumination of your stairs, kitchen, living room, restaurant, etc. A versatile product which allows you to create stunning lighting effects in a heartbeat!
This LED Strip works on 24 Volts, so to connect it to a 110-230V power outlet you will need a power supply. Please see the category Accessories -> Power Supplies
for this. The more LED strip you want to connect, the higher the power consumption will be and therefore the bigger the power supply must be. Look below for an indication of which power supply to use with this LED strip:5cm - 0.5 meters:
Power Supply 12 Watt0.5 meters - 1.5 meters:
Power Supply 36 Watt1.5 meters - 2.5 meters:
Power Supply 60 Watt2.5 meters - 3.5 meters:
Power Supply 84 Watt3.5 meters - 5 meters:
Power Supply 120 Watts 5 meters - 8 meters:
Power supply 200 Watt 8 meters - 16 meters:
Power supply 400 Watt More than 16 meters:
Use multiple power supplies or contact us for advice and price.
This LED Strip can be dimmed in combination with an LED Dimmer.Remark:
This LED strip is delivered on waterproof rolls of 5 meters with connection wire on each end. If you want to shorten the LED strip, or if you order a shorter length, you will need to solder new wires onto the LED strip and make the cut section waterproof again. For this purpose, the LED strip comes with end-caps. You can use glue, two component resin or putty to secure these end caps to the strip and make everything waterproof again. You can also order silicone glue from our website.
For more information on how to connect LED Strips, please see our manual
This product is in stock in large quantities. If you are searching for LED strips with specific requirements, please contact [email protected]
for info and prices. We can supply custom LED Strips of almost any type.Stock:
This article is in stock.Details:
Luminous flux: 2000 lumen per meter.
Color Temperature: 2700-3000K (Warm White)
Number of LEDs per meter: 350 single line
Waterproof: Yes (IP66)
LED Type: 2216
Amperage: 1 A / meter
Power: 24 W / meter
Can be cut every 7 LEDs
Strip width: 14mm
Strip height: 5mm