Miboxer T4 RGBWA 4 Zone Wireless Wall Controller

Mi-Light 2.4 GHz T4 4-Zone Wall Panel RGBWA / RGB-CCT

You can connect an infinite number of lamps, LED strips, or downlights and LED strip controllers with the wireless T4 wall panel from Miboxer. You have access to a maximum of 4 separate groups or "zones" where you can control the LED lighting.

For example, you can link the LED strips per room to one zone and then control them with the wall panel. You can adjust the color and color temperature, as well as the brightness and saturation.

Suitable for Mi-Light / Miboxer products and RGBWA / RGB-CCT LED strips

The 4-zone wall panel is suitable for special Miboxer products, such as LED lamps, spots, downlights, and floodlights, but also for RGBWCCT LED strips (in combination with a Miboxer RGBCCT LED Strip controller).

Extensive features

The wireless T4 panel from Mi-Light offers the possibility to switch lamps on or off, but can obviously do much more. You can dim the linked lighting, set your favorite color using the color wheel, or use the "mode" function. With this button, you can choose from 9 different programs that provide impressive lighting effects. You can play these faster or slower via the "S" button. The panel operates on 110-230V mains power.

Stylish appearance

The compact wall panel from Mi-Light has a modern design, thanks in part to the glass anti-scratch panel. This not only provides an elegant look but also protects the product from scratches and makes it extra durable.

Instructions for use

Installation of the wall panel:
First, install the wall panel in a central location in the house. It uses the 2.4 GHz radio frequency (RF), which provides a range of up to 30 meters. So, place the panel in a location where the range is greatest throughout the house.

Connecting the LED strips:
To control LED strips, you always need a controller. Connect the LED strips to a Miboxer controller and connect it to the power supply, which is then plugged into the socket.

Pairing the LED strips with the Mi-Light wall panel:
Using a Miboxer controller, you can wirelessly connect the LED strips to the wall panel. All you have to do is unplug and plug back in the transformer plug to which your LED strips are connected. Once the transformer plug is plugged into the socket, the controller searches for a signal. You now have three seconds to tap the desired zone on the wall panel. Press the dash, or the "zone on" button. After that, the LED strip will flash, indicating that the pairing was successful. From that moment on, you can control the lighting with the panel.

Product specifications:

Product name: 4-Zone RGBW Smart Panel.
Type: T4
Brand: Miboxer
Suitable for all Mi-Light / Miboxer products and RGBW LED strips (in combination with a Miboxer controller).
Controls color, color temperature, saturation, and brightness.
Works via 2.4 GHz (RF) with a range of up to 30 meters.
Compact, stylish, and durable.
Easy to set up.
Includes mounting materials (screws, double-sided tape).
Input voltage: 100-230V AC.
Standby power: 20uA.
Operating temperature: -20 -60 ℃.
Transmission power: 6dBm.
Modulation method: GFSK.
Color: White.
Product dimensions: 86mm x 86mm x 17mm.
Includes manual.