LED Strip 120 LED/m IP68 Waterproof Green - per 50cm

Flexible LED Strip from the roll and available to order by length. Choose the length you want and optionally order multiple (different) lengths. The LED strip will be delivered in one piece on a roll, up to a maximum length of 5 meters.

24 Volt: Available in 24 Volt.

Flexible LED strip with adhesive backing for easy installation. This LED strip is very easy to install. You can shorten the strip yourself every 6 LEDs (24V). In addition, this LED strip is extremely flexible and allows for tight bends. The power is supplied via soldering pads located every 5 cm (24V) along the strip.

Application of green 3528 LED strip

This green LED strip with 120 LEDs per meter (type 3528) is ideal for decorative indoor lighting. Think of accents behind furniture, shop displays, cove lighting, or illuminating objects at events or holidays. Thanks to the bright and even light output, it’s perfect for creating atmosphere in living rooms, shops, or trade show displays — but also suitable for facades or garden lighting.

Which power adapter do I need?

This strip runs on 24 Volts, so to connect it to a wall outlet you’ll need a power adapter. See the category Accessories -> Power Supplies.

For a 24 Volt LED strip, choose a 24 Volt power supply.

Which power adapter do you need? That depends on the total wattage of your LED strip. This LED strip consumes 9.6 Watts per meter. Example: If you want to connect 5 meters of LED strip at 9.6 Watts per meter, you’ll need a power adapter of at least 5 x 9.6 = 48W. If you want to connect 10 meters at 9.6 Watts per meter, the adapter must be at least 96 Watts (10 x 9.6W). You can always choose an adapter with a higher capacity — it will never deliver more power than needed. Example: You can connect 96 Watts of LED strip to a 120 Watt adapter; power usage will still be only 96 Watts, as the power supply will adapt accordingly.

Connecting long lengths?

Make sure there is a direct power connection at least every 10 meters. Otherwise, voltage drop may occur, causing the last LEDs to shine less brightly.

IP68, Extrusion waterproof

Our IP68 waterproof LED strips have the highest waterproof rating and are suitable for outdoor use and even underwater. Because they are made from a solid silicone extrusion, there’s no way for moisture or water to penetrate the LED strip, making these strips extremely reliable for outdoor applications.

Required accessories for IP68 LED strips

To solder and mount waterproof LED strips, additional accessories are often needed, such as end caps, silicone sealant, and mounting brackets. You can find these accessories on this page.

Soldering

If you order an LED strip + adapter, we will always include a wire or connector that can be soldered to the LED strip and fits the adapter. Don’t want to solder yourself? No problem — we can do it for you. Just add the soldering service for flexible LED strips to your shopping cart and we will ensure you receive ready-to-use strips.

Extra steps when soldering waterproof LED strips

Soldering a waterproof LED strip requires more work and practice than soldering a non-waterproof one. For a waterproof LED strip, follow these steps:

• First, thoroughly remove the silicone from the soldering point where you want to attach a cable.
• Make sure both the soldering pads on the strip and the ends of the wires are properly tinned.
• Slide the end cap over the cable so you can later glue it onto the strip.
• Solder the wires to the LED strip.
• Now slide the end cap over the end of the LED strip and seal it with silicone sealant.
  
  

For more information on how to connect flexible LED strips, please refer to the manual.