Controlador RGB con control remoto IR

Número de artículo:: 000088
Disponibilidad: Disponible (197)
Plazo de entrega: Enviado dentro de 1 día laborable
Controlador para las tiras de LED RGB.

Este dispositivo es necesario para controlar la tira LED RGB. Los cuatro cables de la tira RGB se conectarán a este dispositivo. A continuación, conecte el otro lado del dispositivo de la fuente de alimentación.
Con control remoto (baterías incluido).

Características: Color sólido, poco a poco cambiando de color, cambio de colores, controlar de intensidad de la luz.

Especificaciones:

Conexiones Fáciles.
Voltaje de entrada y salida: 12V DC
Salida: 3x CMOS
Memoria (recuerda el último ajuste cuando la energía se apaga):
RGB Tipo de conexión: ánodo compartido
Recomendación  Máxima: 2A para cada canal R, G, B  (72 Watt en total)
Dimensiones: 50mm x 35mm x 22mm
Temperatura de funcionamiento: -20 a 60 grados centígrados
Christopher Gull 21-01-2013 01:44

Really good RGB controller and remote for its price! However, beware that settings are quite limited, such as the timing for colour change, which I think is too fast even at slowest speed. I tested how long it would take for one primary colour to change to another, and it was under 30 seconds. I prefer about 2 minutes between colour changes. Also, the automatic colour changing isn't stepless, which causes flickering while some colours are changing. The good points are that the controller "box" is very small, that it has a wire that lets you mount the IR receiver further away from the controller (it allows you to mount the box out of sight, and only have the receiver visible), and that the remote control is flat and small, which makes it easy to make a small homemade holder on the wall where you can put the remote control (remote control also works well even when you don't point it at the receiver).

4 estrellas basado en 1 opiniones
Powered by Olark