Flexible LED Strip
||Out of stock
sold per 50cm. The LED Strip is delivered in one piece up to 5 meters. Example: If you put 3x 50cm of LED strip in your shopping cart, you will receive one 1.5 meter LED Strip. However, if you put 16x 50cm of LED Strip in your shopping cart, it is delivered as 1x5m and 1x3m. Etc.
You can solder multiple lengths together to create one long LED Strip.
This RGB-WW LED Strip can produce any color that you want, including warm white! Using normal RGB LED Strip it is quite hard to set a pleasant white color, so this LED Strip is ideal if you want to have the option to choose between both RGB Colors and Warm White.
Applications: Stylish architectural lighting. Illumination of your stairs, kitchen, living room, restaurant, etc. A versatile product which allows you to create stunning lighting effects in a heartbeat!This LED strip contains 30 RGB LEDs and 30 Warm White LEDs Per Meter.
This LED Strip requires the use of an RGB-WW Controller
. It works on 12 Volts, so to connect it to a 110-230V power outlet you will also need a power supply. Please see the category Accessories - Power Supplies
for this. The more LED strip you want to connect, the higher the power consumption will be and therefore the bigger the power supply must be. Look below for an indication of which power supply to use with this LED strip:10cm - 80cm:
Power Supply 12 Watt80cm - 2.5 meters:
Power Supply 36 Watt2.5 meters - 4 meters:
Power Supply 60 Watt4 meters - 5.5 meters:
Power Supply 84 Watt5.5 meters - 8 meters:
Power Supply 120 Watt
8 meters - 16 meters:
Power supply 200 Watt16 meters - 27 meters:
Power Supply 400 WattMore than 27 meters:
Use multiple power supplies in combination with an amplifier
or contact us
for advice and price. Note:
Connecting one single length of more than 14 meters is not possible, due to loss of current inside the LED strip. For lengths longer than 14 meters, the strip should be split up and powered separately. Also please pay attention to the maximum current of your RGB-WW Controller. Usually this is around 144 Watts. To connect more than 144 Watts of LED Strip to it, you will need to use RGB Amplifiers. Please do not hesitate to contact us for advice!Remark:
Delivered with a cable to connect to the RGB Controller. This connector needs to be soldered onto the LED strip. If you do not know how to solder: no problem, we can do this for you. Add "soldering service for flexible LED Strips" to your shopping cart and we will do all the necessary soldering for you. Look under Accessories -> Service
or scroll to the bottom of this page.
For more information on how to connect LED Strips, please see our manual
This product is in stock in large quantities. If you are searching for LED strips with specific requirements, please contact email@example.com for info and prices. We can supply custom LED Strips of almost any type.Details:
Luminous flux: Max. 1000 lumen per meter.
LED Color: RGB / Warm White 2800-3200K.
No. of LEDs per meter: 30 RGB, 30 Warm White
LED Type: 5050 SMD
Amperage: 1.2 A / meter
Power: 14.4 W / meter
Can be cut every 6 LEDs.
Strip width: 10mm (0.39 inches)
Strip height: 2mm (0.08 inches)
Niels Laan 03-08-2013 20:27
Zeer mooi licht, door de combo RGB met Witte leds. Gemakkelijk opmaat te maken en aansluiten door de soldeer services was appeltje eitje. Gebruik hem samen met de nieuwe Fibaro Zwave RGBW controller.
- Perfecte services
- Snele geleverd
- Super kwaliteit
stars based on 1