LED Neon Flex is the successor to traditional Neon lighting. The Neon Flex consists of a flexible silicone U-profile with a normal LED strip inside. The U profile is filled with white silicone potting. This creates a beautiful diffuse light in which the individual bright spots are no longer visible. LED Neon flex is ideally suited for creating light lines that are in view. Think for example of walking lines in the ground, or for example signage! The LED Neon Flex tube is IP67 waterproof and therefore very resistant to water and moisture. All LED Neon Flex on our site has a vertical light emission. So, when the tube is placed on the ground in a bend, the light will radiate upwards.
Our LED Neon works on 24 Volt. As mentioned, there is an LED strip inside the tube, so the operation is the same as that of an LED strip. You can use the LED Neon Flex with all (24 Volt) adapters on our site, and all (RGBW) Controllers are suitable. Our LED Neon Flex can be shortened per 10cm. When the U profile is cut, the ends must be made waterproof again. You can waterproof the ends again with silicone end caps which are sold separately. Look for "related products" at the relevant LED neon flex or search in the category "Accessories for IP68 LED Strip". If you have questions about the installation, you can always contact our customer service.