Flexible RGB LED strip with adhesive tape on its backside for easy mounting. This LED strip is ideal for the handyman: You can cut the strip every 10 cm to create any size you need. Moreover, this LED strip is extremely flexible and very narrow corners can be made with it. The power is supplied through the available soldering points, which can be found on the LED Strip every 10 cm.

Applications: Stylish architectural lighting. Illumination of your stairs, kitchen, living room, restaurant, etc. A versatile product which allows you to create stunning lighting effects in a heartbeat!

Price per 50 centimeters (1.7 feet) of LED Strip. When ordering more, the strip will be delivered on a roll with a maximum length of 25 meters.

The strip contains 30 RGB LEDs Per Meter.

This LED Strip requires the use of an RGB Controller. It works on 12 Volts, so to connect it to a 110-230V power outlet you will also need a power supply. Please see the category Power Supplies for this. The more LED strip you want to connect, the higher the power consumption will be and therefore the bigger the power supply must be. Look below for an indication of which power supply to use with this LED strip:

10cm - 1.5 meters: Power Supply 12 Watt
1.5 meters - 5 meters: Power Supply 36 Watt
5 meters - 8 meters: Power Supply 60 Watt
8 meters - 14 meters: Power Supply 100 Watts (If you want to connect one length of 14 meters, both ends should be connected to the power supply to avoid loss of current)
14 meters - 21 meters: Power supply 150 Watt (Note: Connecting one length of more than 14 meters is not possible, due to loss of current inside the LED strip. For lengths longer than 14 meters, the strip should be split up and powered separately)
More than 21 meters: Use multiple power supplies in combination with an amplifier or contact us for advice and price.

Remark: Delivered with a cable to connect to the RGB Controller. This connector needs to be soldered onto the LED strip.
 
For more information on how to connect LED Strips, please see our manual.

This product is in stock in large quantities. If you are searching for LED strips with specific requirements, please contact info@buyledstrip.com for info and prices. We can supply custom LED Strips of almost any type.


Details:
Luminous flux: Max. 500 lumen per meter.
LED Color: RGB
Voltage: 12V
Amperage: 0.6 A / meter
Power: 7.2 W / meter
Can be cut every 3 LEDs.
Strip width: 10mm (0.39 inches)
Strip height: 2mm (0.08 inches)