60 LEDs per meter.

Flexible LED-strip with adhesive tape for easy mounting. This strip is very easy to install. You can cut the strip every 5 cm to create any size you need. Moreover, this LED-strip is extremely flexible and very narrow corners can be made with it. The power is supplied through the soldering points which can be found on the strip every 5 centimeters.

Applications: Stylish architectural lighting. Illumination of your stairs, kitchen, living room, restaurant, etc. A versatile product which allows you to create stunning lighting effects in a heartbeat!

Price per 50 centimeters (1.7 feet). When ordering more, the strip will be delivered on a roll with a maximum length of 25 meters.

Each 50 centimeter piece contains 30 LEDs.

This LED Strip works on 12 Volts, so to connect it to a 110-230V power outlet you will need a power supply. Please see the category Power Supplies for this. The more LED strip you want to connect, the higher the power consumption will be and therefore the bigger the power supply must be. Look below for an indication of which power supply to use with this LED strip:

5cm - 2.5 meters: Power Supply 12 Watt
2.5 meters - 7.5 meters: Power Supply 36 Watt
7.5 meters - 12.5 meters: Power Supply 60 Watt
12.5 meters - 20 meters: Power Supply 100 Watts (If you want to connect one length of 20 meters, both ends should be connected to the power supply to avoid loss of current)
20 meters - 31 meters: Power supply 150 Watt (Note: Connecting one length of more than 20 meters is not possible, due to loss of current inside the LED strip. For lengths longer than 20 meters, the strip should be split up and powered separately)
More than 31 meters: Use multiple power supplies or contact us for advice and price.

This LED Strip can be dimmed in combination with an LED Dimmer.

Remark: Delivered with a connector which can be plugged into the power supply. This connector needs to be soldered onto the LED strip. If you do not know how to solder: no problem, we can do this for you. Add "soldering service for flexible LED Strips" to your shopping cart and we will do all the necessary soldering for you. Look under "Service & Accessories" or scroll to the bottom of this page.

For more information on how to connect LED Strips, please see our manual.

This product is in stock in large quantities. If you are searching for LED strips with specific requirements, please contact info@buyledstrip.com for info and prices. We can supply custom LED Strips of almost any type.


Stock:
This article is in stock.

Details:
Luminous flux: 250 lumen per meter.
Color: Green
Wavelength: 525 nm.
Voltage: 12V
Amperage: 0.4 A / meter
Power: 4,8 W / meter
Can be cut every 3 LEDs.
Strip width: 8mm (0.31 inches)
Strip height: 2mm (0.08 inches)